These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that shuts meter off after 20 minutes of non-use.

Meters offer two modes of five-point calibration. For quick and easy calibrations, use automatic mode with preset calibration points at the most popular values. For more flexibility, calibrate in the manual mode and set your calibration point at any value.

Set-up functions let you customize automatic temperature compensation and cell constant. The protective rubber boot helps shield your meter from drops and dings, and features a built-in stand.

CON 6+ features automatic or manual ranging across five ranges for a wide variety of applications ranging from pure water to boiler blow down water.

Click below to download Acrobat (.pdf) file of:

Portable Cond 6+ Manual

The economical, simple-to-use pH tester measures pH levels and temperatures quickly, displaying them both simultaneously on a large dual-line LCD. It has a pH range from 0 to 14 with an accuracy of ¡Ó0.1 pH. The tester features up to three pH calibration points with auto NIST and US buffer recognition.

Additional features include a long-lasting durable electrode with polymer reference electrolyte; status icons for measurement stability, calibration, and battery life; and self-diagnostics. The IP67-rated housing features an easy-to-grip design and floats if accidentally dropped in water when sensor cap is on. The tester, powered by four AAA batteries, can operate up to 400 hours continuously. The unit will auto power-off after 8 minutes of nonuse to conserve power.

These rugged, economical meters are very easy to use. Features include all push-button calibration, hold function,auto-off, and splash-resistantkeypad. Read concentration in ppm and mV as well as pH and temperature in ºC. The included protective rubber boot also acts as a meter stand for benchtop use. Order ISE electrodes separately.

Click below to download Acrobat (.pdf) file of:

Portable ION 6+ Manual

Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking measurements with the dual ppm and mV display. Up to three ion-concentration standards (choose from 0.1, 1.0, 10.0, 100.0, or 1000.0 ppm) may be calibrated.

The easy-to-use, microprocessor-based meter features HOLD, ATC, recorder output, and electrode diagnostics. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display LCD provides excellent visibility—even from a distance. Meter accepts pH, ORP, or ion-selective electrodes with BNC

Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking measurements with the dual ppm and mV display. Up to three ion-concentration standards (choose from 0.1, 1.0, 10.0, 100.0, or 1000.0 ppm) may be calibrated.

The easy-to-use, microprocessor-based meter features HOLD, ATC, recorder output, and electrode diagnostics. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. The convenient pull-out quick reference card keeps procedures handy at all times. The large, dual-display LCD provides excellent visibility—even from a distance. Meter accepts pH, ORP, or ion-selective electrodes with BNC

The PC 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips

Accessories

Probe, conductivity,4-cell, K = 1.0, epoxy body for 2700 meters

The pH 2700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance and features stability indication. All measurements include temperature display. The meter includes auto-buffer recognition for both USA and NIST pH buffer sets, automatic or manual temperature compensation, temperature in °F or °C, and display Hold. A calibration due alarm function means no more out-dated calibrations. The water-resistant membrane keypad offers password protection for both set-up and calibration.

Multiple pH slopes and offset display enables quick, easy electrode diagnosis. The electrode holder can be mounted on either side of the meter. The convenient pull-out, quick-reference card keeps keypad functions at your fingertips.

The microprocessor-based pH 5+ meter is OAKTON’s most economical portable pH meter, yet it gives you the same high accuracy and reliability of our other portable meters! Use this meter to take routine pH and temperature measurements. Meter includes a protective rubber boot that also acts as a meter stand.

Click below to download Acrobat (.pdf) file of:

Oakton pH5+ and pH6+ Meter Manual

Click below to download Acrobat (.pdf) file of:

Portable pH 5+ Manual

Achieve professional results at an economical price! The microprocessor-based pH 6+ meter gives you high accuracy and reliability. Use this meter to take pH, mV and temperature measurements. The millivolt readout lets you take ORP readings. Meter includes a protective rubber boot that also acts as a meter stand.

Click below to download Acrobat (.pdf) file of:

Portable pH 6+ Manual

The pH/CON 700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance. Dual-display allows you to read both a measured parameter and temperature at a glance. The meter features pH auto-buffer recognition for both USA and NIST buffer sets (1.68, 4.01, 7.00, 10.01 and 12.45 or 1.68, 4.01. 6.18. 9.86, and 12.45), automatic or manual temperature compensation, temperature selectable in either °F or °C, display HOLD, and water-resistant membrane keypad.

Previous calibration points, electrode slope and offset, and conductivity/TDS cell constants are stored in memory for quick and easy retrieval. The convenient pull-out quick reference card keeps keypad functions at your fingertips.

Accessories

WD-35608-78 Probe, conductivity, K = 10.0, epoxy body, 3 ft cable

WD-35608-72 Probe, conductivity, K = 0.1, epoxy body, 3 ft cable

WD-35608-74 Probe, conductivity, K = 1.0, Ultem body, 3 ft cable

WD-35608-76 Probe, conductivity, K= 1.0, glass body, 3 ft cable,

This pocket-sized tester has a replaceable single-junction sensor which can be easily switched out, allowing you to save money by using the tester body over and over again. A large LCD makes viewing measurements easy and features a three-color backlight indicating operational mode—blue for measurement, green for calibration and red for alarm condition.

Additional features include hold function to lock in measurements, self-diagnostic error message, and status icons for measurement stability and low battery voltage. The IP67-rated housing features an easy-to-grip design and floats if accidentally dropped in water when sensor cap is on. Powered by four AAA batteries, the tester can operate up to 400 hours continuously. To conserve power, the unit will auto power-off after 8 minutes of nonuse.

The pH tester features up to 3-point pH calibration with NIST or US auto buffer recognition, a pH range from -2 to 16 with an accuracy of ±0.01 pH, and automatic temperature compensation. It can support a ORP probe (sold separately).

The Oakton pHTestr 50 has a replaceable double junction sensor for longer life, an expanded number of applications, and easy maintenance. Double-junction electrode sensor handles wastewater and solutions containing sulfides, heavy metals, and TRIS. Electrode sensor offers a clog-resistant Kynar® junction and a recessed, glass pH bulb to protect against breakage. Valox sensor housing resists most chemicals.

The keypad clicks to confirm operation, and allows access to a variety of functions. Calibrate up to three pH points with the auto-buffer recognition at both USA and NIST standard buffers. Additional features include an automatic temperature compensation (ATC), hold function, auto-off function, self-diagnostic error messages, and a three-segment battery-life indicator.

These top-of the-line waterproof meters offer features that are typically found on much more expensive models. The IP67-rated housing allows use in dirty and wet environments without harm to the meter. Datalog up to 500 points either automatically, manually, or at timed intervals. User-selectable “calibration due” alarms, automatic or manual standards recognition, and single or multiple calibration points provide flexibility in meeting your data quality objectives. Infrared (IrDA) wireless technology lets you easily download data—no need for additional cords. The large backlit LCD shows the measured value, measured units, temperature, time, battery life, and menu options.

The pH 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you simply view the pH or mV measurement simultaneously with temperature and calibration % slope. Auto buffer recognition identifies the correct pH buffer for rapid, reliable calibration.

Calibrate meter with up to six points from USA, NIST, and DIN pH buffer sets. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and electrode status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

These waterproof handheld meters feature a –2.00 to 19.99 pH range expandable to 0.001 pH resolution. Combined with accuracies up to ±0.002 pH, these meters provide a new benchmark in our pH meter line.

Store up to 500 data sets in the meters memory. Time-and-date-stamping meets Good Laboratory Practice (GLP) standards.

The pH 600 meters offer the latest in calibration capabilities including up to 6 calibration points, a user-settable calibration due alarm, and up to 15 buffer options with auto buffer recognition of USA, NIST, DIN, and PWB standards.

The infrared IrDA wireless technology makes PC downloading more convenient and easier. Dual power up allows you to use batteries while out in the field or the optional AC power adapter while in the lab.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

The pH/RDO 450 meter uses optical measurement technology offering fast response times and long-term stability with minimal maintenance. Plus the automatic temperature compensation (ATC), barometric pressure compensation, and salinity correction further ensure measurement accuracy. The large, backlit LCD lets you view pH, ISE, mV, % saturation, or mg/L (ppm) simultaneously with temperature.

Rugged, IP67-rated waterproof housing makes the meter ideal for plant or field testing. Additional features include ready (stability) indicator, smart averaging, hold function, calibration alarm, and battery-life indicator.

Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cable for USB and RS-232 connectivity.