Rotary Evaporators
Cold Finger Condenser - RE402 & RE402P
Cold Finger Condenser - RE402 & RE402P
Can be orientated for left or right handedness
Simple, counterbalanced lift mechanism
PTFE/glass liquid pathway for chemical inertness
Long life graphite impregnated PTFE vacuum seal
Efficient flask and vapour tube ejection system
A Rotary evaporator is a distillation unit that incorporates an efficient condenser with a rotating sample flask. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, the sample or Florentine flask can additionally be heated by an accessory bath to accelerate the process. The entire system has been designed to be vacuum tight, an accessory vacuum pump can be connected to reduce the overall pressure and hence the boiling point of your sample.
Each unit is also provided with an easy to use vacuum release and a continuous feed system, which allows more solvent to be drawn into the rotating Florentine flask without the need to stop the operation.
There is also a plastic coated version available, providing additional safety when using the glassware under vacuum. The plastic coating ensures, that operator injury is less likely, should any glass component fail while under vacuum. The added security of a plastic coated also gives the operator sufficient time to transfer any potentially dangerous chemicals to a suitable vessel without spillage.
The RE402 rotary evaporator comes with a vertically orientated, cold finger glass condenser for use with ice or dry ice for volatile or low boiling solvents. Providing a cooling solution without the necessity for a constant supply of cooling water.
Glass set 402
Cold finger condenser, vertical coil adaptor, drain for cold finger condenser, vapour tube for cold finger condenser, receiving flask 1000ml, Florentine flask 1000ml, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip.
Glass set 402P
Cold finger condenser plastic coated, vertical coil adaptor plastic coated, drain for cold finger condenser, vapour tube for cold finger condenser, receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip
Speed range | 10 to 310rpm |
---|---|
Vacuum | 3 mm Hg |
Lift distance | 180mm |
Dimensions (w x d x h) | 385 x 335 x 470-610mm |
Electrical supply | 100-240V, 50-60Hz |
Model | Description |
---|---|
RE402 | Rotary evaporator complete with glass set 02 |
RE402P | Rotary evaporator complete with glass set 02P |
Diagonal Condenser - RE400 & RE400P
Can be orientated for left or right handedness
Simple, counterbalanced lift mechanism
PTFE/glass liquid pathway for chemical inertness
Long life graphite impregnated PTFE vacuum seal
Efficient flask and vapour tube ejection system
A Rotary evaporator is a distillation unit that incorporates an efficient condenser with a rotating sample flask. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, the sample or Florentine flask can additionally be heated by an accessory bath to accelerate the process. The entire system has been designed to be vacuum tight, an accessory vacuum pump can be connected to reduce the overall pressure and hence the boiling point of your sample.
Each unit is also provided with an easy to use vacuum release and a continuous feed system, which allows more solvent to be drawn into the rotating Florentine flask without the need to stop the operation.
There is also a plastic coated version available, providing additional safety when using the glassware under vacuum. The plastic coating ensures, that operator injury is less likely, should any glass component fail while under vacuum. The added security of a plastic coated also gives the operator sufficient time to transfer any potentially dangerous chemicals to a suitable vessel without spillage.
The RE400 rotary evaporator comes with a diagonally orientated glass condenser for standard distillations.
Glass set 400
Diagonal coil condenser, vapour tube for diagonal condenser, receiving flask 1000ml, Florentine flask 1000ml, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip.
Glass set 400P
Diagonal coil condenser plastic coated, vapour tube for diagonal condenser, receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip. (Please note plastic coated glassware is limited to 80°C and therefore unsuitable for use with the RE400OB oil bath)
Speed range | 10 to 310rpm |
---|---|
Vacuum | 3 mm Hg |
Lift distance | 180mm |
Dimensions (w x d x h) | 385 x 335 x 470-610mm |
Electrical supply | 100-240V, 5060Hz |
Model | Description |
---|---|
RE400 | Rotary evaporator complete with glass set 00 |
RE400P | Rotary evaporator complete with glass set 00P |
Digital baths - RE400DB, RE400OB
Digital baths - RE400DB, RE400OB
Corrosion resistant bowl
Easy to clean
Integrated carry handle
Cool touch outer case
These precise digital baths have been specifically designed to be used with the Stuart rotary evaporators to give maximum efficiency for the smallest footprint. The clear LED digital display shows the actual bath temperature or the set temperature. The RE400DB is suitable for lower temperature applications whereby the RE400OB is can be used with oil for higher temperature evaporations. Both models feature outer case's which are made from chemically resistant polypropylene.
(Please note plastic coated glassware is limited to 80°C and therefore unsuitable for use with the RE400OB oil bath)
Model | RE400DB | RE400OB |
Description | Digital Water bath | Digital Oil bath |
Temperature range | RT to 90°C | RT to 180°C |
Display resolution | 1°C | 1°C |
Temperature control | ±1°C | ±1.5°C (water) ±3°C (oil) |
Capacity | 4.3 litres | 5 litres |
Heater power | 1400W | 1400W |
Dimensions (mm) | 285 x 295 x 244 | 282 x 282 x 244 |
Electrical supply | 230V, 50Hz | 230V, 50-60Hz |
Model | Description |
---|---|
RE400DB | Digital water bath |
RE400OB | Digital high temperature bath |
Recirculating Cooler's - SRC5, SRC14
Recirculating Cooler's - SRC5, SRC14
Easy to read LED display
Quiet operation
Powerful 450W cooling capacity
Safety cut out feature
The recirculating cooler offers powerful cooling for an external device. By accurately controlling the temperature of your cooling medium down to -20°C, efficiency of operations such as condensing can be greatly improved. A recirculating cooler is not only much more powerful than conventional water cooling, but is also an ideal alternative when water consumption is an issue for economical, environmental or practical reasons.
The SRC5 provides a powerful cooler with a compact footprint suitable for mounting on or under a bench. The LED digital display clearly shows the current temperature of the cooling medium to ±2°C, while the set temperature is revealed by a one button press.
The unit has a dedicated drain for easy emptying and cleaning. It also incorporates a built in safety alarm to indicate an overload relay for the refrigeration unit. A dust filter is incorporated and can be accessed without tools via the removable front panel.
Recirculating cooler, SRC14
With all the features of the SRC5 the SRC14 is ideal where larger volumes are required, or when extra cooling capacity is needed, electron microscopes for example. The unit is floor standing with lockable easy roll castors to ensure excellent mobility.
SRC5 | SRC14 | |
Cooling capacity | 450W at 10°C | 1050W at 10°C* |
Temperature range | -20 to +30°C | -20 to +30°C |
Control accuracy | ± 1°C (30 to 0°C), ± 2°C (-1 to -20°C) | ± 2°C |
Bath capacity | 3 litres | 16.5 litres |
Pump rate | 9 litres minute | 12 litres minute |
Dimensions (w x d x h) | 205 x 445 x 545mm | 354 x 384 x 851mm |
Net weight | 28kg | 43kg |
Electrical supply | 220V, 50Hz | 220V,50Hz |
Model | Description |
---|---|
SRC5 | Recirculating cooler, 3 litre capacity |
SRC14 | Recirculating cooler, 16.5 litre capacity |
Rotary evaporator witegvapor diagonal or vertical 180°C 20-280rpm 30-5000ml
Features:
- diagonal and vertical model
- digital display
- for flasks from 50 - 3,000 ml
- speed range from 20 - 280 rpm
- easy height control by accurate motor with up/down buttons
- double-binding PTFE and NBR nitrile vacuum seal
- anti-abrasion, anti-aging, anti-chemical
- leaning angle can be adjusted
- included water bath is made of stainless steel
- special glassware for greaseless usage
Safety mechanism:
- insulated heater
- double-jacketed bath body
- low water level detection and automatic stop function
Controller:
- built-in digital controller with LCD display
Rotary Evaporator with set
• 5L heating bath with a wide temperature range (room temp.to180°C), independent temperature control,make it can be used separately. Water/oil heating mode can be changed only through a switch.
Rotary Evaporator with set glassware vertical
Specifications | RE100-Pro |
Motor Type | Brushless DC motor |
Speed Range | 20-280rpm |
Display | LCD(speed,temperature, time) |
Clockwise and Anti-clockwise | Yes |
Heating Temperature Range | Room temp. to 180℃ |
Control Accuracy | ±1℃ |
Heating Power | 1300W |
Stroke Displacement | automatic 150mm |
Timer | Yes |
Time Setting Range | 1-999min |
Dimension[D×W×H] | 465×457×583mm |
Weight | 15kg |
Permissible Ambient Temperature | 5-40℃ |
Permissible Relative Humidity | 80%RH |
Protection Class | IP20 |
Weight | 2.8kg |
Protection class | IP21 |
USB Interface | Yes |
Voltage/Frequency | 100-120/200-240V 50/60 Hz |
Power | 1400 W |
Rotary Evaporators RV 10 auto pro V-C
RV 10 auto pro V-C
The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative handling concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the transparent coated vertical condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply. The new IKA Vacstar digital included in the package is controlled directly from the drive unit of the RV 10 auto via the data cable provided.
- New: 4 l heating bath
- automatic boiling point detection
- integrated vacuum controller
- integrated solvent library with 40 preset solvents and expansion option
- bright, high-contrast, TFT, color-graphic control panel
- universal safety heating bath
- optimized heating bath volume for rapid achievement of working temperature
- heating bath with ergonomic handles
- temperature safety circuit
- boil-dry protection
- condenser with 1500 cm² cooling surface and low space requirements
- evaporation flasks available with coated glass
- intuitive handling concept with simple menu navigation
- programming option for up to ten individual procedures
- smooth start
- right or left rotation
- timer function
- end-point recognition
- push-off mechanism for tightly-fitting flasks
- digital interfaces: USB port and RS-232 interface for remote control
- multi-language operating system
- automatic cooling water management
- automatic ventilation
- automatic heating bath management
-
Accessories – RV 10 auto pro V-C
RV 10.5 Vertical condenser with manifold and cut-off valve for reflux distillation
PRICEUSD 1,846.00Ident. No. 0003743000RV 10.50 Vertical condenser with manifold and cut-off valve for reflux distillation, coated
PRICEUSD 2,025.00Ident. No. 0003743100RV 10.6 Vertical-intensive condenser with manifold and cut-off valve for reflux distillation
PRICEUSD 2,028.00Ident. No. 0003744000RV 10.60 Vertical-intensive condenser with manifold and cut-off valve for reflux distillation, coated
PRICEUSD 2,364.00Ident. No. 0003744100RV 10.600 Distilling spider with 6 distilling sleeves (NS 29/32)
PRICEUSD 645.00Ident. No. 0003739400RV 10.601 Distilling spider with 12 distilling sleeves (NS 29/32)
PRICEUSD 1,099.00Ident. No. 0003739500RV 10.602 Distilling spider with 20 distilling sleeves (NS 29/32)
PRICEUSD 1,557.00Ident. No. 0003739600NEW!
Rotary Evaporators RV 10 auto V
RV 10 auto V
The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative control concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply.
- New: 4 l heating bath
- integrated vacuum controller
- integrated solvent library with 40 preset solvents and expansion option
- bright, high-contrast, TFT, color-graphic control panel
- universal safety heating bath
- optimized heating bath volume for rapid achievement of working temperature
- heating bath with ergonomic handles
- temperature safety circuit
- boil-dry protection
- condenser with 1500 cm² cooling surface and low space requirements
- evaporation flasks available with coated glass
- intuitive handling concept with simple menu navigation
- programming option for up to ten individual procedures
- smooth start
- right or left rotation
- timer function
- end-point recognition
- push-off mechanism for tightly-fitting flasks
- digital interfaces: USB port and RS-232 interface for remote control
- multi-language operating system
- automatic cooling water management
- automatic ventilation
- automatic heating bath management
-
Accessories – RV 10 auto V
RV 10.5 Vertical condenser with manifold and cut-off valve for reflux distillation
PRICEUSD 1,846.00Ident. No. 0003743000RV 10.50 Vertical condenser with manifold and cut-off valve for reflux distillation, coated
PRICEUSD 2,025.00Ident. No. 0003743100RV 10.6 Vertical-intensive condenser with manifold and cut-off valve for reflux distillation
PRICEUSD 2,028.00Ident. No. 0003744000RV 10.60 Vertical-intensive condenser with manifold and cut-off valve for reflux distillation, coated
PRICEUSD 2,364.00Ident. No. 0003744100RV 10.600 Distilling spider with 6 distilling sleeves (NS 29/32)
PRICEUSD 645.00Ident. No. 0003739400RV 10.601 Distilling spider with 12 distilling sleeves (NS 29/32)
PRICEUSD 1,099.00Ident. No. 0003739500RV 10.602 Distilling spider with 20 distilling sleeves (NS 29/32)
PRICEUSD 1,557.00Ident. No. 0003739600NEW!
Rotary Evaporators RV 10 auto V-C
RV 10 auto V-C
The completely revised RV 10 auto is the flagship of the IKA Rotation Evaporator product line. Its impressive features include an innovative control concept with a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards. The RV 10 auto offer all properties required for efficient, safe, and cost-effective operations. These include automatic control of the vacuum and cooling water volume. Its intuitive handling concept quickly leads its users to their desired results in every application. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface. Thanks to its extended ramp programming capability, the RV 10 auto allows users to carry out customized procedures. Other innovative features, such as smooth start, interval mode, right-left operation in interval mode, or the timer function for time-lapse tests, make everyday work in the laboratory much easier. Safety is ensured by the motorized lift with safety-stop function that automatically lifts the evaporation flask out of the heating bath in the case of power failure. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The receiving flask and the condenser are also available in coated versions. The USB port or the RS-232 interface enable remote control with the IKA “labworldsoft” software package and an update option with the firmware update tool. The device comes complete with vacuum hoses and hose connectors for your in-house cooling water supply.
- integrated vacuum controller
- integrated solvent library with 40 preset solvents and expansion option
- bright, high-contrast, TFT, color-graphic control panel
- universal safety heating bath
- optimized heating bath volume for rapid achievement of working temperature
- heating bath with ergonomic handles
- temperature safety circuit
- boil-dry protection
- condenser with 1500 cm² cooling surface and low space requirements
- evaporation flasks available with coated glass
- intuitive handling concept with simple menu navigation
- programming option for up to ten individual procedures
- smooth start
- right or left rotation
- timer function
- end-point recognition
- push-off mechanism for tightly-fitting flasks
- digital interfaces: USB port and RS-232 interface for remote control
- multi-language operating system
- automatic cooling water management
- automatic ventilation
- automatic heating bath management
-
Accessories – RV 10 auto V-C
RV 10.5 Vertical condenser with manifold and cut-off valve for reflux distillation
PRICEUSD 1,846.00Ident. No. 0003743000RV 10.50 Vertical condenser with manifold and cut-off valve for reflux distillation, coated
PRICEUSD 2,025.00Ident. No. 0003743100RV 10.6 Vertical-intensive condenser with manifold and cut-off valve for reflux distillation
PRICEUSD 2,028.00Ident. No. 0003744000RV 10.60 Vertical-intensive condenser with manifold and cut-off valve for reflux distillation, coated
PRICEUSD 2,364.00Ident. No. 0003744100RV 10.600 Distilling spider with 6 distilling sleeves (NS 29/32)
PRICEUSD 645.00Ident. No. 0003739400RV 10.601 Distilling spider with 12 distilling sleeves (NS 29/32)
PRICEUSD 1,099.00Ident. No. 0003739500RV 10.602 Distilling spider with 20 distilling sleeves (NS 29/32)
PRICEUSD 1,557.00Ident. No. 0003739600